Filming with the Bolex H - Text 1
Taking things in hand
An initial glance at the Bolex H16 already reveals a fairly sophisticated camera: on the simplest model, the right side has five knobs and levers and a counter (indicating how much film is left on the reel). Relatively light (2.85 kg), it takes 15- or 30-metre reels, giving a maximum shooting time of 4 minutes, 5 seconds (at 16 frames per second) without changing the cartridge. It can be loaded in daylight, with cartridges with opaque sides, because only the outer coil will be clouded. Loading is mechanically automatic: once the cartridge is in place, the end of the film, which one cuts diagonally with a special knife located at the bottom of the magazine, is engaged in the points of the toothed sprocket wheel for advancing the film. A lever then engages to hold the film in the necessary path, forming loops of the right size. The problem of loading the film is crucial, because with a professional camera this is one of the most complex technical operations, carried out blindly, with any mistake jamming the film, stopping the camera, creating inopportune noise or tearing the film, and even possibly ruining the entire reel, before or after exposure. A camera made for amateurs must thus absolutely avoid this operation, which is both difficult and has so much at stake. This necessitates that the internal organization of the camera makes this possible, but it also necessitates a commercial network for supplying the amateur with prepared reels in cartridges adapted to the camera, either in a form specific to the brand or by establishing a more or less universal standard.
